Stainless Steel Plates

  • Home

Stainless Steel Plates

We are trading and supplying a range of Stainless Steel Plates to our clients. S S Plates are used in various industrial applications, these plates are manufactured by the experienced professionals from high-quality raw material and advanced technology.

They are available in grades ASTM A 240 Tp 202 / 304 / 304L / 316 / 316L / 321 /309 / 310 / 317L / 409 / 410 / 410S / 430 .

Size

5 mm to 100 mm thick in 1000 mm to2500 mm width & 2500 mm to 12500 mm length

Mechanical Composition

Grade Tensile strength Min Mpa Yield strength Min Mpa % Elongation in 50 mm Min Hardness (Max)
BHN RB
301 515 205 40 217 95
304 515 205 40 201 92
304L 485 170 40 201 92
310S 515 205 40 217 95
316 515 205 40 217 95
316L 485 170 40 217 95
317 515 205 35 217 95
317L 515 205 40 217 95
321 515 205 40 217 95
347 515 205 40 201 92
409 380 170 20 179 88
409M 430 275 20 187 90
410S 415 205 22 183 89
410 450 205 20 217 89
420 700 max 15 217 95
430 450 205 22 183 89
JSL AUS 515 205 205 40 217 95
JS-203 515 205 40 217 95

Chemical Composition( in percentage )

Grade C (Max) Mn (Max) P (Max) S (Max) Si(Max) Cr Ni Mo
301 0.15 2 0.045 0.03 1 16.00 – 18.00 6.00 – 8.00 –
304 0.08 2 0.045 0.03 0.75 18.00 – 20.00 8.00-10.50 –
304L 0.03 2 0.045 0.03 0.75 18.00-20.00 8.00-12.00 –
310S 0.08 2 0.045 0.03 1.5 24.00-26.00 19.00- 22.00 –
316 0.08 2 0.045 0.03 0.75 16.00- 18.00 10.00- 14.00 2.00 -3.00
316L 0.03 2 0.045 0.03 0.75 16.00 – 18.00 10.00 – 14.00 2.00 – 3.00
317 0.08 2 0.045 0.03 0.75 18.00 – 20.00 11.00 – 14.00 3.00 – 4.00
317L 0.03 2 0.045 0.03 0.75 18.00 – 20.00 11.00 – 15.00 3.00 – 4.00
321 0.08 2 0.045 0.03 0.75 17.00 – 19.00 9.00 – 12.00 –
347 0.08 2 0.045 0.03 0.75 17.00 – 19.00 9.00 – 13.00 –
409 0.08 1 0.04 0.01 1 10.50 – 11.75 0.5 –
409M 0.03 0.81.2 0.03 0.03 0.40.75 11.00- 12.00 1.5 max. –
410S 0.08 1 0.04 0.03 1 11.50- 13.50 0.6 –
410 0.15 1 0.04 0.03 1 11.50- 13.50 0.75 –
420 0.35 0.5 0.035 0.015 0.05 12.00 – 13.00 0.20.3 –
430 0.12 1 0.04 0.03 1 16.00 – 18.00 0.75 –
JSL AUS 0.08 7.08.0 0.07 0.03 0.75 15.50 – 16.50 4.25 – 4.75 –
JS-203 0.08 9.2510.25 0.07 0.03 0.75 14.25 – 15.25 2.25 – 2.75 –
301M 0.1 4.55.5 0.06 0.03 0.75 14.50 – 15.50 6.0 – 7.0 –

Hot Rolled Stainless Steel

Hot Rolled Stainless Steel
Thickness 2.5 – 8.0 mm
Width 750 – 1275 mm
Coil ID Annealed and Pickled
Edge Mill Edge
Sheet 1500 to 6300 mm

Cold Rolled Stainless Steel

Coil Sizes (mm)
Dimension Range (mm) Standard Size (mm)
Thickness 0.3 to 6.00 0.30,0.40,0.50, 0.55, 0.63, 0.70, 0.80, 0.90, 1.00, 1.25, 1.50, 1.60, 2.00, 2.50, 2.80, 3.00, 3.15, 3.60, 4.00, 5.00, 6.00
Width 50 to 1250 1000, 1250
Inner Diameter 406, 508 or
610

Standard Grades

Standard Grades Produced

301, 301L, 304, 304L, 309S, 310S, 316, 316L, 321 Standard Grades Produced are: SSLNA, SSLNB, SSLNM, SSLNQ, SSLNI, SSLN4, 204Cu 409, 409L, 409M, 410S, 420, 430, 439, 440B, 441

Finishes Produced

Standard Finishes Produced

No 0, No 1, CR, 2D, 2B, No3, No4, No8 Special finishes like Moon Rock, Honey Comb, Stripe, Slip Free etc. are also produced for Decorative and Industrial applications.

Sheet/Plate Sizes (mm)
Dimension Range (mm) Standard Size (mm)
Thickness 0.5 to 6.00 0.50, 0.55, 0.63, 0.70, 0.80, 0.90, 1,00, 1.25, 1.50, 1.60, 2.00, 2.50, 2.80, 3.00, 3.15, 3.60, 4.00, 5.00, 6.00
Width 600 to 1250 1000, 1250
Length 500 to 4000 1500, 2000, 2500, 3000, 3500,4000
x